![]()
The JBL Bar 1000 MK2 is a soundbar system for film fans who want an immersive home cinema without the hassle of separate components.
It offers strong connectivity and supports Dolby Atmos and DTS:X. The surround speakers detach from the bar, run on batteries, and connect wirelessly.
JBL Bar 1000 MK2 Full Specs
JBL Bar 1000 MK2 Price
The JBL Bar 1000 MK2 costs $1200 in the US, £749 in the UK, and AU$1430 in Australia.
It sits below the flagship Bar 1300 MK2 and a small step above the Bar 800 MK2.

At this price, it targets buyers who want more than a stereo soundbar but do not want an AV receiver, a room full of speakers, and a tangle of wires.
JBL Bar 1000 MK2 Design
The box contains a lot of hard plastic. Fully assembled, the soundbar measures 1203 x 52 x 113mm and weighs 5.5kg. Take off the detachable rear speakers and the bar shrinks to 900mm wide. Each rear module measures 228 x 52 x 128mm.
You may also like: JBL Cove Speakers Bring Whole-Home Audio to Wi-Fi
JBL supplies magnetic end caps for both the main bar and the rear speakers. They cover the ends when the modules are apart and keep a rounded, finished look when the system runs in full cinema mode.
I think the system suits TVs of 55 inches and larger. The bar looks fairly compact without the rears attached. But the rears need to return to the bar after each film so they can recharge, so make sure you have room for them.

The rear speakers also have a tripod bush, so you can put them on stands if you have no convenient spot for them. It is not the prettiest option, but it works.
The subwoofer needs planning too. It weighs 9.1kg and is much larger than the MDF boxes that come with most soundbar systems. It is a rear-ported drum measuring 325 x 400 x 325mm, with a 10-inch driver.
The package includes a simple black remote, and I do not like it. It has no backlight, and the buttons are labelled in grey instead of white. That makes them hard to read in a dim or dark room. I ended up using my phone’s torch to see them.
You may also like: JBL Go 5 Review: AirTouch Stereo, USB-C Audio and IP68 Tested
The soundbar talks to you through an LED dot display on the front. It shows whether Dolby Atmos is arriving and confirms your menu choices.
JBL Bar 1000 MK2 Connectivity
This is where the Bar 1000 MK2 does best. Even pricey soundbars often give you a single HDMI eARC connection. The JBL gives you that plus three more HDMI inputs. It also has Ethernet, a USB port, and a digital optical input for older TVs. Bluetooth is version 5.3, and Wi-Fi is dual-band.

The extra HDMI inputs make it very handy in a busy home cinema. You can plug several sources straight into the soundbar instead of the TV, and use the bar as your AV hub.
JBL Bar 1000 MK2 Features
JBL says the Bar draws on its long history in cinema sound, and that claim may well hold up.
A key feature is MultiBeam 3.0, JBL’s own digital beamforming system. It aims to create a wide, immersive sound field by combining DSP, phase manipulation, psychoacoustics, and driver-level steering of the sound.
The Bar 1000 MK2 does not need an immersive codec to use all its drivers. It upmixes any source to multichannel. It finds the dialogue and locks it to the centre channel, then spreads music and other sounds to the rear speakers. The result is surround ambience that fills the room.
You may also like: Marshall Acton IV and Stanmore IV Bring Better Bass, Repairs
You can also switch on Broadcast mode. It turns one or both detachable modules into a multiroom Bluetooth speaker, so you can play TV audio or music in a separate room.

The driver array is thorough. The main bar holds six racetrack drivers, two 25mm tweeters, and a pair of 70mm up-firing full-range drivers. Each detachable rear speaker has its own racetrack cone and a 70mm height driver.
The system passes through Dolby Vision and HDR10+. It works with Google Home, Apple AirPlay, Google Cast, Spotify Connect, and Tidal Connect, and it is Roon Ready. Pure Voice 2.0 is also on board to improve dialogue clarity.
JBL Bar 1000 MK2 Sound Quality
JBL says this system runs a 7.1.4 channel layout. To my ears, it sounds closer to 5.1.4, though that hardly matters. I put the detached rear speakers at either end of my sofa and connected everything.
With the rears in place, the system produces a true wraparound soundfield. Having physical surround speakers behind you makes a clear difference right away.

The Dolby Atmos “Amaze” demo shows it well. Sounds move smoothly, and the rears do a convincing job of placing effects behind and around you.
You may also like: Marshall Milton ANC: Specs, Battery Life and Price
Height is where it runs out of reach. I felt some movement above my head, but the system does not build the seamless overhead canopy that a larger speaker setup can. The rear modules in particular lack the power to project upwards and bounce off the ceiling.
You cannot adjust rear speaker volume in small steps. You pick from three presets: Low, Mid, and High. I would not place the modules far from your main listening seat. Keep them close and use High.
Bass is something the Bar 1000 MK2 has plenty of. Despite the large subwoofer and driver, both the main bar and the sub handle the low end.
Most soundbar and sub systems set the crossover at 100Hz, and the sub takes everything below that. JBL sets it lower here, at around 50Hz by my guess. That gives the low frequencies a strong, prominent front end.
The Bar 1000 MK2 also makes no effort to hide its deep-throated ability. Bass control is limited to five steps on the remote. Level 5 makes everything boom, even speech, so avoid it.
The system has plenty of power. The whole package is rated at 960W RMS. The main bar delivers 500W, each surround speaker adds 80W, and the subwoofer claims 300W.
Dawn of Justice is a lot of fun on it. When Superman and Wonder Woman fight Doomsday, the weighty delivery exaggerates both the big action and the drumbeat in Wonder Woman’s theme.
How low does it go? I measured bass down to 31.5Hz, and it plays there with real authority.
Reacher on Prime Video shows the same character. The Bar 1000 MK2 grabs every chance to throw out a barrage of bass. It felt like Reacher was punching me in the face.
Its ability to upsample audio and spread it around the room is impressive too, even when the source was never mixed for multichannel.

Dialogue is clean and crisp. Pure Voice lifts speech. I did not find it very engaging, but some people will like the extra boost.
You may also like: Marshall Woburn III Now $499: Best Bluetooth Speaker for Living Room Audio
With music, the system has detail and presence. Spatial mixes streamed from Amazon Music sound rather subdued, though that depends on the track. Elton John’s Dolby Atmos mix of Rocket Man never quite takes off the way I expected.
Even so, the system is always entertaining. Real immersion, slamming bass, and wide versatility make it a formidable performer.
JBL Bar 1000 MK2 Verdict
The JBL Bar 1000 MK2 is a home cinema sound system with strong connectivity and a useful feature: detachable, battery-powered rear speakers that give you real surround sound. It is not a subtle performer.
Pros | Cons |
| Detachable wireless rear speakers | Bass-heavy balance is difficult to tame |
| Good connectivity | Height effects are present but limited |
| Massive subwoofer | Remote control is not impressive |
Final Thoughts
The JBL Bar 1000 MK2 gives you what you want from a soundbar: big, rollercoaster-style audio and excellent connectivity.
The biggest takeaway is that the detachable rear speakers are more than a marketing gimmick. They create a far more convincing sense of surround sound than virtual processing can.
The system also has enough raw power to make a large screen feel cinematic. It has a few flaws. The remote is awful to use, and the rear modules lack the power to push the soundstage upwards. Their convenience still makes them worth having.
If you have room for the large subwoofer and you enjoy its punchy bass, movie night will be a lot of fun.













